No spark on the postal

[Postal]

I am not getting any spark from my Distributer or Coil. I put a brand new coil on it too. I am getting power to both wires on either side on the Coil. I have a little bit of power coming out of the coil when I turn the key on, but not sure on how many volts, I only have a light tester. I have checked all my wiring to my electronic ignition box, and power is getting to it. Any thought? Please no smart *** comments only those comments that can help.
Thanks

[Oompa Loompa]

need to borrow a better tester or is that one sufficient??
think we might have one around...you are welcome to rifle thru the shint if you want.

[Stumblinman]

Are all fuses good>? Distributor turning>? Timing Good? Sometimes timing will jump, check for TDC...

OK now for the smart *** answer...
Sometimes when the spark goes out you have to replace the BIC...

[Postal]

Im running into town to get a new Ignition Module. I hope that does it. Since I just replaced the Coil, everything else is wiring, which all power seems to be flowing. I did have to scrap the Cap and rotor, but that woul'nt be my issue, since im not gatting anything from the coil.

[drvnmsbessie]

Im SHOCKED!!!! lol.

[Postal]

Yup it was the ignition module. Put the new one on after stacy had to give me the colors since im color blind.

[Oompa Loompa]

yeah for stacy!!

[Stumblinman]

:music-smiley-026:


not to be a downer but if the ignition module goes out, many times it's another issue to be discovered....