drvnmsbessie
08-08-2009, 11:03 PM
Well I was up until 1:30am today swapping out the 205 t-case in the CJ5 and replaced it with a dana 300 thanks to advance adapter. I just happened to have the 300/adv. adptr. set up in one of the other Jeeps that is being tore down. Ya know that 205 isnt 100lbs like I was led to believe, lets try 200+!!!:smiliecrybaby2:. Finally got it out and tried to use the tranny jack adapter my buddy lent me that fits on a floor jack to install the 300. After 3 failed tries and a few choice words ( :banghead: ) I got fired up and laid on my creeper, put the darn thing on my chest, slid uder the Jeep and benched the thing into place!!! Nothing like pure stubborness to get-r-done! It took about 2 mins. to do it that way, should have done it like that in the first place but after dropping the 205 on my uh umm privates the first time I took the thing out, I figured I would be safe and use the Tranny Jack deal, well the desire to wheel overrid my better judgement and ta'da one t-case installed!!:D. Now if it will only rain so I do not have to work and can go wheel!! Get to dancing you guys!!!!:bow: