Pinion question

[friedtwinky]

So what is the best way to pull a yoke if you dont have a puller? I mean im sure i can get under there and use trial and error methods but i figured some of yall have already done that for me! So if you have any suggestions lemme know! I am just goin in there to change the seal.

[CoolJeep]

Hey butt head all you have to do is remove the yoke then use a screw drive and remove the old seal being careful not to score the seal seat on the diff and then install the new seal and then reinstall your yoke. should take all of about 20 minutes start to finish. If you need the torque on that nut let me know I can give that to you as well

[Postal]

Tie your winch around it and yank it!!!!!hahaha

[friedtwinky]

YEAH YEAH.... i knew that part Vance hahaha... i just didnt know if you had to use a puller to get it off or not! lol

[drvnmsbessie]

Should be able to just pop the nut off the yolk and pull it off, may need a couple whacks with the mallet but should come off easy. Just DO NOT over tighten the yolk when you put it back on, make it tight but you do not need to hammer on it.